Condensed Water Test Chamber

Product Detail

Use

Cyclic corrosion tests and different kinds of salt fog and condensation water test. Meet all of the standards related to the pilot.

Test principle

1 solution is sprayed by compressed air, corrosive mist and fog surrounded the test samples in the test box.

2, the test may be continuous or cycle.

3, the corrosion resistance of the samples of corrosion is defined as the sample time, longer show that corrosion resistance as possible.

Advantage

1, open the test box controlled by compressed air, so can be used to sample both hands, eco-friendly design leads to better sample tests, all parameter setting can be done through the touch screen. Users can store 10 sets of the main program, each main program consists of 15 and 5 separate programs, so the car different specifications of the changing climatic conditions in the standard tests can be preset.

2, moreover, the instrument also installed a control function, allowing test carried out under appropriate conditions of humidity. Temperature and humidity are available through the images and data are displayed on the screen. Amount of spray solution can be done by adjusting the air pressure and the pump, spray volume can be optimal adjusted treatment, solution box and the control box separation in order to observe the residual solution. Control and display device is designed to be very easy to allow problems to be quickly identified and addressed. Pump is mounted on the outside for easy viewing and replace the hose.